How Vorzilo Free Sensi Works

What the generator actually is

The generator is a deterministic calculator that runs entirely in your browser. It takes six inputs — platform, brand, model, RAM, screen refresh rate and finger setup — and maps them onto a set of six Free Fire sensitivity values.

There is no machine learning model behind it and no server-side prediction. Calling it a device-based sensitivity engine is the accurate description: the same inputs always produce the same output, so you can reproduce your result at any time.

Step 1 — Platform: Android or iPhone

Android and iOS handle touch input differently, and Free Fire behaves differently on each. Values that feel controlled on an Android mid-ranger often feel loose on an iPhone with the same numbers.

Picking the platform first lets the engine start from a baseline that already reflects those differences instead of applying one universal number set to every device.

Step 2 — Brand and model

Brand and model are used as a rough hardware class signal — roughly, how much headroom the device has and how steady it tends to be under load. A gaming-focused phone, a flagship, a mid-ranger and an entry-level device do not behave the same way in a twenty-minute session.

We do not claim to hold a lab-measured profile for every model on the market. The model step narrows the class; the refresh rate and RAM steps do most of the fine work.

Step 3 — RAM

RAM does not change sensitivity by itself. What it changes is how consistently your device holds a frame rate while the game loads assets, plays effects and keeps background apps alive.

Inconsistent frames make a fixed sensitivity feel variable: the same drag turns further in a smooth moment than in a stuttering one. On lower-RAM devices the engine stays more conservative so a frame dip does not turn a normal flick into an over-flick.

Step 4 — Refresh rate

Refresh rate is the single input most players underestimate. A 120Hz panel updates and samples your movement far more often than a 60Hz panel, so an identical thumb swipe produces a larger, faster camera movement.

Set this to the refresh rate you actually play at, not the maximum the panel advertises. If Free Fire is capped at 60fps on your device, choose the value that matches your real in-game experience — that is what your hands feel.

Step 5 — Finger setup

Two, three, four or five fingers change which values carry the most weight. A two-finger player does most aiming with the same thumb that moves, so extreme values are punishing. A four- or five-finger player separates movement, aim and fire, so tighter scope values become usable.

The engine shifts the balance between General, Free Look and the scope values based on this answer rather than handing everyone the same profile.

Reading and testing the result

The result is a starting point that is already in a sensible range for your hardware — not a final answer. Treat the first session with new values as a calibration session, not a ranked push.

• Enter the values exactly as shown in Free Fire's sensitivity menu
• Spend ten minutes in Training Ground before any ranked match
• Change one value at a time, in steps of about five points
• Give any change three sessions before deciding it is wrong

If it feels too fast or too slow

Too fast usually shows up as overshooting: your crosshair passes the head and you correct backwards. Lower General first, then the scope value that feels worst — usually 2X or 4X.

Too slow shows up as under-turning and running out of thumb travel. Raise General and Free Look before touching scope values, because turn speed and aim precision are separate problems.